The 2032 Reflector is 6-1/2 inches in diameter, and disperses light in a pattern of 70 degrees just like the 2100-C, 2110-C, 2120-C and 2140-C. The reflector is secured to any Novatron 2103FC bare tube head, M300 and M500 monolight using a pair of attachment knobs.

The 2034 Reflector is a 16 inch diameter parabola with the focal point being offset to create a softer (feathered) illumination. Twist lock bayonets allow reflector to quickly mount or dismount from any Novatron bare tube monolight. The reflector is secured by a pair of attachment knobs.

Allows the use of Novatron heads with 6 pin configuration with older power packs with 5 pin configurations.

The 4015 is a 15' extension cable used to lengthen the cord on a Flashhead when needed. * Use of this cord on a Flashhead will decrease the f/stop by approximately 1/4 stop.

25 foot extention cord for flash head cables. Use of an extention cord will reduce output up to 1/3 stop.

The N4026 is a "Y" shaped adapter cable used to add an extra flash head to a power pack. The power pack will perform as if it had an extra outlet on the pack.

The 4030 Slave Unit is a terrific little electronic device that can fire a flash unit when it "sees" another flash unit go off. Any number of slaves can be used to fire an unlimited number of flash units.

Just plug the 4030 into any HH sync outlet on a power pack or any other lighting panel.

The 4046 is an adapter used to mount Novatron flash equipment on the 5020 Light Stand. It is a 5/8" female to 3/8" male adapter with a knob to secure it to a light stand.

*for fan-cooled heads only

This medium duty stand rises to a maximum of 10'. All aluminum construction for durability in a lightweight package. Folds down to only 27.5" making it ideal for location work.

ONLY ONE AVAILABLE
The case is custom formed from a high impact copolymer plastic and has a metal rim with hinges, three clasps, casters, retractable pull handle and a carrying handle.

This case has provisions for one power pack, four flash heads, and room to store umbrellas and light stands. The case measures 35-1/2" L x 16" W x 11" H.

Novatron direct replacement for kit umbrella.